固体运载火箭底部对流热环境数值模拟

采用数值仿真方法,开展了固体运载火箭底部对流热环境计算研究。采用线性化热力学参数的单一介质简化处理方法,模拟了发动机喷流与高速主流的流场,得到了热流与温度参数,并与飞行试验结果进行了对比分析。结果表明固体运载火箭底部存在较为严酷的对流热环境,本文的数值计算结果与真实飞行试验结果吻合较好,该方法可为固体运载火箭的热环境与防热设计提供参考。     

非线性能量阱对飞轮振动抑制效果的实验研究

利用薄片金属梁作为非线性刚度元件，构建一种非线性能量阱。为了验证非线性能量阱对飞轮振动特性的抑制效果，搭建地面飞轮测试系统。分别采用力锤敲击和飞轮以恒定转速运行的方法施加不同载荷，对安装非线性能量阱前后测试系统各典型位置的振动响应进行对比研究。利用实测数据，采用傅里叶变换方法将动态响应信息分别在时间域和频率域内展开。研究表明：力锤敲击产生的冲击载荷和飞轮以恒定转速运行产生的稳态载荷均可以激发非线性能量阱定向能量传输；受非线性能量阱的影响，柔性支架设备安装面和飞轮安装面振动响应得到有效抑制。但是，由于非线性能量阱阻尼和吸振子质量较小，不同程度削弱了其振动抑制效果。     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

基于大数据的空管运行安全预警研究

空中交通管制的任务是确保航空器的安全飞行,为了保证飞行安全,需要进行空中交通管制系统运行安全评估及预警的研究.借鉴大数据理论建立空中交通管制大数据概念,从影响空中交通管制系统运行的主要风险因素出发,建立空中交通管制安全运行的状态向量空间,利用主成分分析法去除基础向量线性相关性,再利用聚类分析过程建立空中交通管制运行安全预警知识库,实现空中交通管制运行安全评估和及时预警.结果表明:所用的预警分类分析方法能够很好地实现预警分类和安全评估,为管制部门的相关决策提供理论依据.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

基于误差预测修正的液体火箭发动机故障预测方法研究

为解决液体火箭发动机故障预测这一难题,提出一种基于误差预测修正的故障预测方法。在历史数据的基础上建立小波过程神经网络故障预测模型,同步计算学习样本的预测误差,根据上述误差建立双并联离散过程神经网络预测模型。预测时,将预测误差值实时补偿到小波过程神经网络预测模型以提高预测精度。通过液体火箭发动机地面试验中的涡轮泵数据对该方法进了验证。结果表明,该方法在预测精度和适应能力上较单一的过程神经网络预测模型有显著提高,进行10步预测时,预测值的标准化均方根误差为0.392,预测平均耗时为76ms,能够用于解决液体火箭发动机故障预测问题。     

金属切削变形过程的有限元仿真初探

切削加工是一个复杂的切削变形过程,工作条件非常恶劣,传统的研究方法主要基于试验研究,物理过程跟踪观察困难,且试验成本非常高,如要想获得较多的试验数据,需采用较多的试验方法,做较多的试验,这样才能使得人们对各种材料的切削性能有较深刻的了解。然而,运用有限元分析、借助于计算机技术等可以用较低的成本揭示切削加工过程,且在较短的时间内能获得较为丰富的各种数据,这对实际生产有极大的帮助。     

MP＊中的等值完全析取范式

讨论中介逻辑命题演算扩张系统ＭＰ＊中在等值意义下的完全析取范式的存在性和唯一性。引入ＭＰ＊中等值全板范式的概念，并用分步构造法证明这种范式在等值意义下是存在的，且是唯一的。     

适用于负过载启动的新型增压输送系统

介绍了一种适用于飞行器在负过载情况下启动的新型增压输送系统,该系统采用气液隔离方式,比国外可重复使用飞行器的增压输送系统结构质量轻、体积小,有利于提高飞行器的性能。分析了该系统的特点,给出了系统的主要性能参数。新型增压输送系统经过冷流试验和热试车的考核,结果均满足设计和使用要求。     

电磁式舵机的驱动设计试验与仿真

针对一种电磁式舵机,基于虚拟仪器技术设计了相应的测试系统,对舵机的动态性能进行了测试分析。考虑到铁磁阻的非线性和漏磁通的分散性,本文采用磁路微分法建立了舵机电磁铁的数学模型,对其动态特性进行仿真分析。结果表明:舵机的性能满足系统设计要求。试验结果与仿真结果基本一致,仿真计算可以用于舵机性能的优化与分析。